Categories

False alarms and system glitches can be aggravating, and even worse, may prevent your security system from working how it should. Luckily, most troubles, from false alarms to dead batteries, are easy to fix. Explore our tips for troubleshooting your home alarm system in Sacramento. We’ll help you keep your family shielded and your system operating smoothly.

Test Your Home Security System In Sacramento

One of the most sensible ways to troubleshoot your property’s defense is to test it! Modern systems have a test mode so you don’t by accident prompt an emergency call. Once in test mode, take these steps:

• Activate your system as you would when you exit your home.
• Open a window or door that has a contact sensor, or test other equipment. Close the window or door so it doesn’t prompt the alarm when you switch out of test mode.
• Permit the alarm to resonate for 60 seconds to make sure a message is sent to the security provider and an entry is created in the alarm activity log.
• Continue testing equipment as you wish
• Review the system activity log to confirm functionality.

Rest assured, monitoring agents can tell that your alarm system is being tested. Just make sure to switch off test mode when done. It’s a good idea to test every other month or anytime you change your home’s internet or phone connectivity.

Check The Positioning And Condition Of Motion Detectors

Although an essential part of your alarm system, motion detectors are well known for false alarms. You can help prevent them with a few simple troubleshooting steps.

• Perform a visual inspection. Is there anything that could shift within the sensor’s detection range, like a window treatment taken by a breeze?
• Is the sensor dirty? Dirt, cobwebs, and debris can result in malfunctions. Check to confirm the face is clean.
• Does the motion detector have pet immunity you can turn on? Some can be configured to ignore pets weighing as much as 100 pounds.
• When was the battery replaced? A low battery may affect performance or cause false alarms.
• Is a heat source impairing the sensor? Too much heat from a fireplace, direct sun, or something else can set off an alarm.

Keep Batteries On Hand And Look Out For Low Battery Notifications

One of the great advantages of new home security systems is that they’ll tell you when batteries are dying. If your system uses a app or control panel, you’ll typically find alerts there. Depending on your system, you could notice an occasional beep when batteries are low. 

Motion sensors, contact sensors, smoke detectors, and other wireless components have batteries that need to be replaced every 1 to 2 years. It’s wise to keep batteries on hand and establish a replacement schedule. Many systems also include a rechargeable backup battery for the main control panel. This backup battery helps keep your system running if your power goes out and should charge back up once power is restored. If it fails to recharge, you should replace it.

Troubleshooting Is Simple With ADT Home Security In Sacramento 

As the leading name in home security, ADT creates systems that offer unsurpassed functionality and protection. Accessing test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always be sent alerts when a battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfect for your Sacramento home and family. Dial (916) 407-0556 or submit our form today!